Main technical parameters
Specification | Unit | Technical parameters |
Max.vertical milling dia. | mm | 32 |
Max end mill width | mm | 125 |
Max.drilling dia. | mm | 50 |
Spindle taper | | 7:24 ISO40 |
Spindle travel Spindle seeds range | mm r/min | 180 94-2256(16 steps) |
Automatic Feed Series sleeve | mm/r | 0.1/0.15/0.3(3 steps) |
Distance spindle to table | mm | 100-580 |
Distance spindle to column | mm | 400 |
Swivel angle of headstock | | ±45° |
Up/down speeds of headstock | mm/min | 2000 |
Table size | mm | 1250×360 |
Table travel | mm | 600×360 |
Table feeds range | mm/min | 22-555(8steps)(max.810) |
T of table(no./width/distance) | mm | 3/18/80 |
Main motor | KW | 1.5/2.4 |
Motor of table power feed | W | 750 |
Up/down motor of headstock | W | 550 |
Coolant pump motor | W | 40 |
N.W./G.W. | kg | 1800/2000 |
Overall dimension | mm | 1800×1900×2300 |