Features
●Bed is made of high tensile cast iron by resin-sand
●Foundary
●Bedways are hardened and ground.
●9 steps and 18 steps spindle speeds are available.
●2.2KW/1.5KW motor give more power suited heavy duty cutting.
●Steel or cast iron stand for your choice.
●Foot and electromagnetic brake are available.
●Protectin systems to meet CE Standards.
●Interlock to prevent simultaneous feed of leadsrew and feedshaft.
●All guides are adjustable through taper gibs.
●Oil-bath lubricated apron gear box.
●Shift gear system to change feed direction.
Main technical parameters
Specification | Technical parameters |
Max.swing over bed | 340mm(133/8″) |
Max.swing over cross slide | 210mm(8″) |
Max.swing over gap | 470mm(181/2″) |
Distance between centers | 750mm(30″) 1000mm(40″) |
Width of bed | 186mm(71/3″) |
Spindle nose | D5 OR D1-5(CAMLOCK) |
Spindle bore | 38mm(11/2″) |
Spindle speeds(number) | 60Hz | 60~2000 r.p.m.(9 STEPS or 18 STEPS) |
50Hz | 60~2000r.p.m.(9 STEPS) 50~1720 r.p.m.(18 STEPS) |
Metric threads | 0.25~9mm (20 KINDS) |
Inch threads | 72~4(3/4) T.P.I. (33 KINDS) |
Module threads | 0.25~3.5mm (12 KINDS) |
Diametral pitch threads | 8~144 D.P. (30 KINDS) |
Longitudinal feeds range | 0.03~0.42mm(0.0012~0.0175in) |
Cross feeds range | 0.015~0.21mm(0.0006~0.0088in) |
Main motor power | 1.5KW |
Net/gross weight (kgs) | 570/670/750 |